Description

The T1K / T1N wax/resin ribbon is an excellent general–purpose ribbon. The wax/resin blend coating provides good substrate compatibility as well as versatile overall performance at medium print energy.

The ribbon provides excellent text and barcode print quality, a good print density of 1.8D. Maximum print speed is a fast 1000mm/sec (40ips). The ribbon prints well on a wide range of flexible plastics as well as coated papers. The printed image offers very good smudge resistance as well as good heat resistance up to 110°C (230°F).

The low-friction silicone back coating ensures excellent printhead protection, preventing clogging and static build-up.

Details

Density : 1.6

‘Print density’ is a measure of how ‘black’ the print appears. The bigger the number, the ‘blacker’ it looks. It is an absolute number measured with a densitometer, here a Macbeth D19C.

Barcode compatability: 0 degrees: 100%  - 90 degrees: 85%

A measure of the edge quality of barcode in the print direction and 90 degrees to print direction: the bigger the number, the better the quality. It is an arbitrary number on a 0-100 scale.

Sharpness: 90%

A measure of print quality, e.g. clarity of fine detail in text, logos, etc.: the bigger the number, the better the quality on an arbitrary number on a 0-100 scale..

Print speed: 1000 mm/second

Maximum recommended speed for this grade

Printhead energy: Medium

The relative level of heat needed to transfer print from the ribbon to the substrate: affected by substrate and print speed. Reducing energy will extend printhead life.

Rub fastness: 80

A measure of resistance of the print to rubbing and scratching. Based on a industry-standard method using a Crockmeter - 680 g/cm3. Printout readable after 200 cycles.

Heat Resistance: 110 C / 230 F

Maximum temperature which the printed ribbon can withstand.

Lightfastness: 7,5

Resistance of fading by Blue Wool scale. From 0-8, where 6= 3-6 months, 7= 6-12 months, 8= 12-24 months. Measured outdoor in tempred zones (Europe/ America).

Water resistance: 100

A measure of the resistance to print to water: the bigger the number, the better the quality on an arbitrary 0-100 scale.

Solvent resistance: 0

A measure of the resistance to print to solvents: the bigger the number, the better the quality on an arbitrary 0-100 scale.

Certifications and approvals

Disposal of used ribbon

All used ribbons should be treated as ordinary industrial waste and disposed of in accordance with local regulations. Cores are made of polystyrene. Ribbons are packed using recycled cardboard and polyethylene film.